SMC3通氣控閥,SMC3通氣控閥原理
④缸速靠進氣節流控制，而且應逆時針回轉壓
力調整用的急速供氣閥，使氣缸在到達行程
末端后，壓力急速上升。調整后再緊固鎖母。
注) 不要過分逆時針回轉壓力調整用急速供氣閥，
以防止氣缸急速伸出。
Easy operation with a push button.
• Piping parts are available in two types: with
One-touch fittings and with Rc thread
Applicable tubing diameter: ø6, ø8, ø10,ø12
缸內壓力排出后再供氣，由于SSC閥有固
定節流孔，屬于進氣節流，故氣缸動作可
防止急速伸出。到達行程末端后壓力急
升。可由壓力調整用針閥逆時針回轉來調
整。調整后必須用鎖母鎖緊

SMC3通氣控閥,SMC3通氣控閥原理
Connection thread Rc: 1/4, 3/8
• Residual pressure release time: Approx. 7
seconds (time required for the pressure to
be 0.5 MPa to 0.05 MPa)
Example of air cylinder residual
pressure release time
是帶快換接頭的速度控制閥
(直通型)的固定用管座。
安裝自由度高。
Residual pressure in the cylinder
can be easily released with one
push of the push button.
Example of circuit diagram (Residual
exhaust of air cylinder)